WPC Wall Panel Instroduction
WPC Wall Panel Product Features
1) 100% recyclable, eco-friendly, saving forest resources
2) With the look of the natural wood but no timber problems
3) Water resistant, no rotten, proven under salt water condition
4) Barefoot friendly, anti-slip, no cracking, no warping
5) No painting, no glue, low maintenance
6) Weather resistant, suitable from minus 40° C to 60° C
7) Insects, and moldy-proof
8) Available in different colors
9) Easy to install and clean
Name
|
WPC Wall Panel
|
Usage
|
Hotel ,Villa, Apartment, Office, Building, Hospital, School, etc.
|
Material
|
Wood Plastic Composite
|
MOQ
|
600 Meter Per size Per Color
|
Surface Treatment
|
Film Coating / Wood Grain / Embossing
|
Detailed Photos
WPC Wall Panle Different Size Show
Installation Instructions
Installing WPC (Wood-Plastic Composite) wall panels is typically straightforward and can be done using basic carpentry tools. Here are general steps to guide you through the installation process:
Tools and Materials Needed:
- Tape measure
- Pencil
- Level
- Saw (hand saw or power saw suitable for cutting WPC)
- Drill/driver with appropriate bits
- Screws or nails suitable for WPC
- Adhesive (if recommended by manufacturer)
- Caulk (if necessary for finishing)
Installation Steps:
-
Preparation:
- Measure the wall area where the WPC panels will be installed.
- Ensure the surface is clean, dry, and smooth. Remove any protrusions or debris.
- If necessary, apply a moisture barrier or primer as recommended by the manufacturer.
-
Cutting Panels:
- Measure and mark the WPC panels according to the dimensions needed for your wall.
- Use a saw to cut the panels to size. Ensure cuts are clean and accurate.
-
Mounting Panels:
- Start at one corner of the wall. Apply adhesive to the back of the first panel (if adhesive is recommended).
- Press the panel firmly against the wall, ensuring it is level. Use a level to check alignment.
- Secure the panel in place using screws or nails. Place fasteners evenly along the edges and through the center of the panel as needed.
-
Continuing Installation:
- Repeat the process for each subsequent panel, ensuring tight joints between panels.
- Trim panels to fit around corners, openings, or obstacles using a saw.
- Maintain level and alignment throughout the installation.
-
Finishing:
- Once all panels are installed, check for any gaps or uneven edges.
- Apply caulk or sealant to edges and joints for a finished look and to prevent moisture infiltration (if recommended by the manufacturer).
-
Cleaning and Maintenance:
- Clean the installed panels regularly with a mild soap solution and soft cloth to maintain their appearance.
- Avoid using abrasive cleaners or tools that could damage the surface.
Tips:
- Follow manufacturer's instructions and recommendations for installation, as methods can vary depending on the specific product.
- Ensure panels are acclimatized to the installation environment before installation to prevent warping or expansion.
- Use appropriate safety gear when cutting and handling WPC panels, especially if using power tools.
By following these steps and tips, you should be able to successfully install WPC wall panels to enhance the aesthetic and functionality of your space.
Remark : More wpc wall panel type and size will be send you , please contact with us .
Company Profile
Yuze Material Factory Show
Linyi Yuze Construction Material Co.,Ltd is a professional manufacturer of new decoration materials. We have 25 years of production experience and 10 years export experience, which makes us very professional at quality control system, and professiona at export.
Our company is located in Linyi city, Shandong Province, China. The main products are WPC wall panel, WPC Ceiling, WPC decking, SPC flooring, PVC marble sheet, PVC molding, WPC timber tubes,and related accessories, etc. Two factory (60 productrion lines) in charge of production. We believe quality is the basic of long time cooperation, therefore, We have strict quality requirements, Our mission is to focus on customers' requirement and continuously create maximum value for customers.
Packaging & Shipping
For package :
1. Different type wpc wall panel different package quantity in the cartong , please confirme the package quantity with the us .
2.We can help your company design the cartong with your company infromations .
3.The marks can be based on your company request and design .
For delivery :
1. We can do FOB or CIF .
2. Can be help for LCL .
FAQ
1.Who we are ?
We are located in Linyi City , Shandong Province , China , main products , wpc wall panel , outdoor products and other decorations and constructions material .
We have more than 10 year's experience for export .
2. how can we guarantee quality?
Always a pre-production sample before mass production;
Always final Inspection before shipment;
4. why should you buy from us not from other suppliers?
We have our own factory, with strong research and development production team, production workshop of more than 1 0 0 0 0 square meters
5. what services can we provide?
Accepted Delivery Terms: FOB,CFR,CIF,EXW;
Accepted Payment Currency:USD;
Accepted Payment Type: T/T,L/C,Credit Card;
Language Spoken:English,Chinese